ABB OmniCore C90XT - Replacing the Robot Signal Exchange Proxy

5.2.4 Replacing the robot signal exchange proxy
Location
The illustration shows the location of the robot signal exchange proxy in the
controller.
xx1900001464
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC30373HAC064662-001Signal exchange
Mating connector for robot signal
exchange proxy.
3HAC065107-001Harness Short-circuit connector
Harness K2.X2 - K4.X8, A2.X13HAC064091-001Harness 24_PC
Harness K2.X12 - K3.X6, K3.X73HAC059273-001Harness dual channel safety
Continues on next page
192 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.4 Replacing the robot signal exchange proxy