ABB OmniCore C90XT - Replacing the Harness ETH Outlet with Cable

5.3.8 Replacing the harness ETH outlet with cable
Location
The illustration shows the location of the harness ETH outlet with cable.
xx1900001482
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC070053-001Harness ETH outlet with cable
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 417.
-Standard toolkit
-ESD protective wrist band
Continues on next page
330 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.8 Replacing the harness ETH outlet with cable