ABB OmniCore C90XT - Installing the Fieldbus Master

3.7.6 Installing the fieldbus master
Location
The illustration shows the location of the fieldbus master in the main computer.
xx1800003420
Harness DeviceNet is an option of process connector.
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC10063HAC043383-001DeviceNet Board
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 417.
-Standard toolkit
-ESD protective wrist band
Required documents
NoteArticle numberDocument
3HAC065464-009Circuit diagram - OmniCore C90XT
Continues on next page
122 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.7.6 Installing the fieldbus master