Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx1900001446
Opening the door on page 174.Open the door.3
Remove the fieldbus slot cover with a
screwdriver.
4
xx1900001917
Insert the fieldbus adapter slave and se-
cure the screws.
5
Closing the door on page 174.Close the door.6
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 165.
7
Product manual - OmniCore C90XT 121
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.7.5 Installing the fieldbus adapter slave devices
Continued
To Next Page
Loading...
