3.8 Installing add-on devices
3.8.1 Installing the extension box
General
As an option an empty extension box can be purchased, to use for custom
equipment. The extension box can be installed on the basic box or anywhere else
as a standalone equipment.
xx1900001453
Note
Connect PE19 as grounding for the extension box in any use case.
Required equipment
InformationEquipment
See Standard toolkit for controller on
page 417.
Standard toolkit
Continues on next page
Product manual - OmniCore C90XT 145
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.8.1 Installing the extension box
To Next Page
Loading...
