ABB OmniCore C90XT - Page 280

Required documents
NoteArticle numberDocument
3HAC065464-009Circuit diagram - OmniCore C90XT
3HAC066561-001Application manual - Conveyor
tracking
Removing the conveyor tracking module (option)
Preparations
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Opening the door on page 174.Open the door.2
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
3
xx1900001446
Removing the conveyor tracking module (option)
Note/IllustrationAction
Disconnect:
• B1.X1 - K2.X19.1 & K2.X19.2
• B1.X7 - K4.X1-5
1
Continues on next page
280 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.13 Replacing the conveyor tracking module(CTM)
Continued