Note/IllustrationAction
For DSQC 609:Refit the end clamp besides the power
supply.
2
xx1900001907
For DSQC 634:
xx1900002443
Connect:
• T5.X1-AC Terminal block
• T5.X2-24V Terminal block
Note
The connector on the AC_in cable
(3HAC061099-001) is fastened to the
cable clip in the illustration when the
power supply optional is not selected.
3
Concluding procedure
Note/IllustrationAction
Closing the door on page 174.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 165.
2
Product manual - OmniCore C90XT 119
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.7.4 Installing the power supply optional device
Continued
To Next Page
Loading...
