ABB OmniCore C90XT - Page 180

Note/IllustrationAction
Reconnect and secure the screw:
• K6.X4, K6.X5 - SMB.
5
Concluding procedure
Note/IllustrationAction
Closing the door on page 174.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 165.
2
180 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.2 Replacing the axis computer
Continued