Refitting the Connected Services Gateway
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx1900001890
Hook up the Connected Services Gate-
way to the bracket and push carefully into
position.
Note
During the installation, the gap between
the lower surface of the Connected Ser-
vices Gateway and the upper surface of
the main computer should be zero.
3
xx1800000495
TOP VIEW
Continues on next page
Product manual - OmniCore C90XT 235
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.8 Replacing the main computer
Continued
To Next Page
Loading...
