Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
3
xx1900001446
Removing the power supply
Note/IllustrationAction
xx1900001907
Remove the end clamp besides the
power supply with a screwdriver.
1
Continues on next page
Product manual - OmniCore C90XT 251
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.10 Replacing the power supply
Continued
To Next Page
Loading...
