ABB OmniCore C90XT - Page 276

Note/IllustrationAction
xx1900001885
Refit the assembly onto the mounting
plate.
3
xx1900001878
xx1900001877
Fasten the assembly with the screws.4
Reconnect all the connectors on as-
sembly of the robot signal exchange
proxy, ethernet extension-seven port
switch (option), ABB ability™ connected
services, and main computer.
5
Continues on next page
276 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.12 Replacing the fieldbus master
Continued