Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx1900001446
Screws: Torx pan head screw M4x8 (4 pcs)Insert the motor connector into the cover
from inner side of the cabinet and fasten
it with the screws.
3
xx1900001916
Reconnect:
• T4.X7, T4.X8, T4.X9
• X1 - K2.X7 & X22
• PE.5 & PE.6
4
Secure the motor connector cables with
the velcro on the frame of the cabinet.
Tip
Use the same position as from removing
the motor connector.
5
Concluding procedure
Note/IllustrationAction
Closing the door on page 174.Close the door.1
Continues on next page
296 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.2.1 Replacing the motor connector
Continued
To Next Page
Loading...
