Note/IllustrationAction
Disconnect:
• X0 - Q0.
X0 - A1.X1.
• PE.3 & PE.4.
2
xx1900001918
Remove the attachment screws.3
Push the power inlet into the cabinet.4
Take the power inlet out.5
Refitting the power inlet
Refitting the power inlet
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx1900001446
Continues on next page
304 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.4 Replacing the power inlet
Continued
To Next Page
Loading...
