ABB OmniCore C90XT - Page 95

Note
It is prohibited to connect the dual-channel switch as shown in the following
figure, as this does not comply with the Cat.3 structure.
0V_CH1_CH2
24V_CH1
AS1+ /
ES1+
AS1- / ES1-
0V_CH1_CH2
24V_CH2
AS2+
/ ES2+
AS2- / ES2-
0V_CH1_CH2
24V_CH1
AS1+ / ES1+
AS1- / ES1-
0V_CH1_CH2
24V_CH2
AS2+ / E
S2+
AS2
- /
ES2-
(A)
(B)
xx1900000599
For more connections other than those illustrated above, carefully assess the risk
before use and contact your local ABB for support.
X15
Description
Customer optional interfaceConnection
Weidmüller S2L 3.50 90FType
S2L 3.50/16/90F 3.5SN BK BX 2*9 pins
1728690000 (or equivalent)Article number
246
135
81012
7911
1416
1315
18
17
xx1800000555
DescriptionPinDescriptionPin
NC18NC17
NC16NC15
ESOUT1+14ESOUT1-13
ESOUT2+12ESOUT2-11
NC10NC9
NC8NC7
NC6NC5
24V_MON4MON_LAMP3
24V_MON2MON_PB1
Continues on next page
Product manual - OmniCore C90XT 95
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.5.9 Descriptions for connectors
Continued