15 Tap Next to calculate the base frame.
xx2100000378
16 Check if the displayed mean error and max error of the base frame calculation
is acceptable. If the estimated error is acceptable, tap Finish to confirm and
store the new base frame.
Note
A mean error of less than 1 mm is acceptable in most cases.
Continues on next page
Application manual - PickMaster® Twin - PowerPac 205
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
4 Working with PickMaster PowerPac
4.3.4.4 Defining the base frame (OmniCore)
Continued
To Next Page
Loading...
