ABB PickMaster Twin - PowerPac - Page 335

Note/IllustrationAction
xx1900000523
Enter the required data into the I/O signal
setting table.
5
Click OK to close the Recipe setting
window.
6
xx1900000674
Right-click on one Indexed WA in the tree
view Cell and select Setting.
7
xx1900000675
Select the Customized Settings in the
Signal Type tab.
8
Enter the required data into the I/O signal
setting table.
9
Click OK to close the Recipe setting
window.
10
Production
For detail procedure on production, see Production on page 327.
Application manual - PickMaster® Twin - PowerPac 335
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.2 Example: One pick from indexed work area and one place work area
Continued