Adding the work area
Note/IllustrationAction
xx1800001420
On the ribbon-tab, click Circular Convey-
or Workarea under Layout.
1
xx1900000481
In the Conveyor Workarea window, enter
"CircularWA" in the Workarea Name text
box.
2
In the Conveyor Board drop down list,
select the correct conveyor board which
has been connected to the circular con-
veyor.
Tip
The connection between the conveyor
board and the conveyor are defined by
users.
3
In the Conveyor drop down list, select
the "Circular" conveyor.
4
In the Workarea Type radio box, select
the "Pick" option.
5
Click OK to finish the adding of the circu-
lar conveyor work area.
6
xx1800001417
On the ribbon-tab, click Workarea under
Layout.
7
Continues on next page
Application manual - PickMaster® Twin - PowerPac 339
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.3 Example: Mixing one pick work area and two place work areas
Continued
To Next Page
Loading...
