Note/IllustrationAction
xx1800001708
Drag the train shape center point to the
item's center.
39
xx1900000651
Click Train to open the train shape of the
item2.
40
Click OK to close and save the PatMax
model.
41
Click Ok to close and save the Item2
setting.
42
Production
For detail procedure on production, see Production on page 327.
360 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
5 Production examples
5.3 Example: Mixing one pick work area and two place work areas
Continued
To Next Page
Loading...
