Manage work area
Right-click on a Conveyor WA icon. The following window is displayed.
xx1800001396
Description
Allows you to manage the settings of the selected work area.Setting
When you right-click on a conveyor work area and select Setting, the
Conveyor WA Setting window is displayed. More details about managing
a conveyor work area is available in the section Adding work area on
page 93.
When you right-click on a circular conveyor work area and select Set-
tings, the Circular Conveyor WA Setting window is displayed. More
details about managing an indexed work area is available in the section
Adding a indexed work area on page 98.
When you right-click on an indexed work area and select Settings, the
Indexed WA Setting window is displayed. More details about managing
an indexed work area is available in the section Adding a indexed work
area on page 98.
Allows you to delete the selected conveyor work area.Delete
Allows you to change the name of the selected conveyor work area.Rename
Continues on next page
62 Application manual - PickMaster® Twin - PowerPac
3HAC064218-001 Revision: B
© Copyright 2021 ABB. All rights reserved.
3 Navigating PickMaster PowerPac
3.4.1 Cell
Continued
To Next Page
Loading...
