Section 6 Maintenance Diagnostic Faults
Abbott VP 2000™ Processor Service Manual 6-13
30-608308/R1—September 2008
Maintenance Diagnostic Faults
The following Fault Troubleshooting Flowcharts are included
in this subsection:
Table 6.3:
Maintenance Diagnostic Fault Index
Fault Number Fault Title
1.0 No X Movement
2.0 No Y Movement
3.0 No Rotation Movement
4.0 Control Module Lights Up All Eights
5.0 Control Module Does Not Light Up
6.0 ‘Control Module Fault Light ON
7.0 System Fan Does Not Run
8.0 Robotic Arm Does Not Follow Program or Manual Command
9.0 Robotic Arm Rotates and Chatters
10.0 General Erratic Behavior of Robotic Arm
11.0 System Will Not Execute a Program
12.0 Slide BAsket Not Aligned With Vessels
13.0 Miscellaneous Faults:
• Will Not Retain a Program After Shutdown
• Squealing or Chattering in the Y-direction (Up/Down)
• Chatter in the X-direction
• All Indicators Not Present at Startup
14.0 Fluid Will Not Recirculate
15.0 Rinse Tank Will Not Fill
16.0 Rinse Tank Overflows
17.0 Fluid Flow Rate Incorrect
18.0 No Air Movement in Dryer
19.0 No Heat in Dryer
To Next Page
Loading...
