Safety Section 2
2-4 Abbott VP 2000™ Processor Service Manual
30-608308/R1—September 2008
Purpose of This Section
This section contains specific guidelines for operation and
warnings for hazards with regard to installation, setup,
troubleshooting, maintenance, and repair of the Abbott VP
2000 Processor.
Significance of These Safety Instructions
Safety of users and personnel can only be ensured if these
safety instructions and safety-related warnings in the other
sections are strictly observed and followed.
Therefore, the Abbott VP 2000 Processor Service Manual
must always be available to all persons performing the tasks
described herein.
In addition to the safety instructions in this Service Manual,
safety instructions in the Abbott VP 2000 User Guide also
apply.
Introduction
This section summarizes the safety instructions applicable to
the Abbott VP 2000 Processor, and those to be observed when
installing, servicing, or upgrading an instrument. Operation,
maintenance, and servicing of the Abbott VP 2000 Processor
could expose individuals to potential safety and health
hazards. All service must be performed in accordance with
procedures described herein. This section describes the types
and locations of potential hazards that could cause physical
harm to an operator or service personnel. Warnings and
cautions are provided to alert operators and service personnel
of potential hazards. Standard warning conventions, including
hazard signal words or symbols are described in subsequent
sections.
To Next Page
Loading...
