Installation Section 4
4-8 Abbott VP 2000™ Proceessor Service Manual
30-608308/R1—September 2008
Site Inspection
The pre-installation site inspection involves the following
activities:
• Confirming site specifications, as listed on the
Pre-Installation Checklist
• Confirming the viability of the delivery route by
walkthrough; refer to Section 3, Technical Data,
Dimensions and Weight.
• Confirming adequate power is available; refer to Section 3,
Technical Data, Environmental Conditions.
• Confirming proper environmental conditions exist; refer
to Section 3, Technical Data, Environmental Conditions.
• Confirm that the Miscellaneous requirements, as listed on
the Pre-Installation Checklist, are met
• Complete the Pre-Installation Checklist.
To Next Page
Loading...
