Section 7 Tools and Equipment Required
Abbott VP 2000™ Processor Service Manual 7-7
30-608308/R1—September 2008
Tools and Equipment Required
The following tools will be sufficient for most repair and
replacement operations required for the Abbott VP 2000
Processor:
• Phillips-Head Screw Driver, No. 1
• Phillips-Head Screw Driver, No. 2
• Phillips-Head Screw Driver with Gripper, 6 in. Shank, No.
2
• Nut Driver, 1/4 in. (Red)
• Nut Driver, 5/16 in. (Yellow)
• Allen Wrench, 0.050 Hex
• Allen Wrench, 7/64 Hex
• Allen Wrench, 3/16 Hex
• Cutter, Flexible Tubing
• Wrench, Open End, 1/4 in.
• Wrench, Open End, 3/8 in.
To Next Page
Loading...
