Maintenance and Diagnostic Procedures Section 5
5-6 Abbott VP 2000™ Processor Service Manual
30-608308/R1—September 2008
WARNING: Pinch Point. The instrument requires
accurate positioning of system modules and slides.
When operating the instrument, it could be necessary
to run tests with the instrument’s safety panels open.
Keep body parts away from moving parts of the
instrument (e.g., Robotic Arm) during setup and test
procedures.
• Stand back from the worktable surface during
these procedures.
• Fast moving devices could cause injuries.
CAUTION: Strong detergents may dissolve surface
coatings.
• Use only recommended cleaning agents.
• Chlorine solutions can pit equipment and metal.
use adequate amounts or repeated applications of
70% ethanol or water until chlorine residue is no
longer visible.
To Next Page
Loading...
