16
109
16 - System
16�3 Passwords
You can change the default passwords on this page.
You must enter a password before you can make changes from the operator panel. The password
can only contain digits (four digits). The default password is 1234.
The "view" level allows you to view settings and data and to download data. The default password
is ab12. A WDB (web database) needs a password in order to download data from a WMPro. The
default password is wdb.
The "operator" level lets you do everything you can do at "view" level, and you can also change
variable parameters in the controller and acknowledge alarms. Default password: cd34. At "cong"
level, you can do everything. The factory setting for the password is ef56.
All passwords except the operator panel password can be between four and 20 characters long and
can contain most characters: A-Z, a-z, 0-9, !?-_. Do not use ' and " or spaces in passwords.
To change a password, enter the new password in the upper eld and conrm it in the lower eld.
Then click Update. Important: You must save each password separately.
To Next Page
Loading...
Need help?
General