EasyManuals Logo

Abelko IMSE WebMaster Pro User Manual

Abelko IMSE WebMaster Pro
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
1
2
1 - Introduction
1�2 Important information
1�2�1 Installation
Electrical installation work may only be carried out by qualied electricians in accordance with the
applicable regulations. The equipment must be unplugged from the mains during installation.
1�2�2 Protection
IMSE Webmaster Pro is protected to IP 20, which means it is not water resistant. It must not be in-
stalled where it might be exposed to water of any kind.
1�2�3 Electromagnetic radiation
When measurement and control systems are installed, the cables must be laid in a way that minimis-
es magnetic and electric elds. These elds can be inuenced by many factors – frequency convert-
ers, relays, contactors, earth currents and static discharge. Cable lengths can also aect sensitivity.
The installation should be carefully planned to minimise interference.
1�2�4 Operating conditions
IMSE WebMaster Pro is designed for an ambient temperature of between –40 °C and +60 °C and up
to 90 % relative humidity (non-condensing).
1�3 Warranty
1. Abelko will repair any design, material and manufacturing defects at its own expense, provided
they occur during normal use and the purchaser submits a claim within 60 months of the veried
delivery date. The purchaser is responsible for removal and re-installation and for paying transport
costs to Abelko, and Abelko will repair the defect and return the equipment free of charge to the
purchaser.
2. The warranty only covers design, material and manufacturing defects. This means that Abelko is
not responsible for defects caused by a failure to follow the instructions, or defects resulting from
normal wear and tear, poor maintenance, unauthorised work, non-compliant operating conditions,
incorrect installation, or repairs not carried out by Abelko or an authorised agent, voltage surges or
other electrical faults.
3. Abelko's responsibility for defects is limited to the circumstances described above. Abelko is not
responsible for any consequential damage that may occur as a result of design, material and manu-
facturing defects. The purchaser is therefore not entitled to use defects as grounds for compensa-
tion or any other claim, except in the circumstances described above, nor may such claim be made
against any third parties responsible for fullling this warranty.
4. Abelko is not responsible for restoring any congurations, etc. added by the purchaser. The pur-
chaser should create a backup of congurations and save them to a server.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Abelko IMSE WebMaster Pro and is the answer not in the manual?

Abelko IMSE WebMaster Pro Specifications

General IconGeneral
BrandAbelko
ModelIMSE WebMaster Pro
CategoryController
LanguageEnglish