17
121
17 - Operator panel
17�3�4 Event log
The event log is a list of alarms and events in reverse chronological order. The most recent events
appear at the top of the list. The content of the event log is the same as the alarm and event log in
the web interface. The event log lists the time when alarms became active/inactive, and shows other
information such as restarts, software updates, use of the "acknowledge all" function.
You can press the right arrow to move to the next display to see when the event occurred and a
signature if there is one. You can also acknowledge individual alarms from the event log.
17�4 Setup menu
Setup is the third and last of the permanent menus. The menu
map on the left shows the menus and submenus in the opera-
tor panel. The Setup menu contains various settings that you
can view and change.
17�4�1 Language
The second line shows the current language. You can change
the language by pressing OK (and logging in). Press the up
and down arrows to scroll through the available languages.
The language setting only aects the language used by the
rmware. Web pages and user-dened names are not af-
fected. The language of the permanent menus in the opera-
tor panel will change, as well as the rmware messages that
appear in the web interface. You should make sure that the
language setting is the same as the web interface.
17�4�2 Menu navigation
Menu navigation can be either active or inactive. If it is active,
a number appears briey in the bottom left whenever you
move around in the menu structure. The number indicates
where you are in the menu structure. For menu navigation, for
example, the number 3.2 will appear because the Setup menu
is menu 3 and Menu navigation is submenu 2.
Active alarms
Alarm1
Alarm2
…
Event log
Event1
Event2
…
Setup
Language
Menu navigation
Clock
Change password
LAN/DNS
Ethernet DHCP
Ethernet IP address
Ethernet netmask
Ethernet gateway
Ethernet DNS serv 1
Ethernet DNS serv 2
Ethernet DNS serv 3
SMS
Alarm max limit 24h
Recipient 1 (+46…)
Recipient 2 (+46…)
Recipient 3 (+46…)
Recipient 4 (+46…)
Testing
Restart
To Next Page
Loading...
Need help?
General