16
115
16 - System
16�4�5 Upgrades
Software updates are supplied in a program that automati-
cally upgrades the WMPro to the latest version. Updates
are available from a support page on the Abelko web site
www.abelko.se.
The le name will be something like this: ”WMPro_
SWE_Release_2_xx�exe”
Download the le to a location, for example the desktop.
Click on the icon to start the program. All you need is the
IP address of the WebMaster and the "cong" password. You must also be able to communicate with
your WMPro as described in section 3. Instructions are provided when the program starts.
NOTE� You can only run the program if you have a direct connection to the WebMaster� You will
not be able to use the program if the WebMaster is connected by modem�
A .zip le is also available on the web site, containing the individual program les. You can use this
le to upgrade as described above.
16�5 Init
In this section, you can erase user scripts, user les, databases and logs. You can also reset every-
thing to factory settings, except controller denitions, user scripts and graphical programs.
The function of Clear ags EDITED and Clear ags USED may not be immediately obvious.
The device keeps track of the channels, parameters, etc. that are in use. When the controller tool or
the sensor tool needs a new channel, it selects one that is uncongured. If someone makes changes
to a channel manually, it is agged as "used". One way to remove the ag is by deleting the channel.
If there are a lot of ags to remove, you can use Clear ags USED. This removes the ags, leaving the
name and other settings intact.
Upgrade
The upgrade program is available
from the Abelko web site www.
abelko.se.
The program keeps track of the
current software version and per-
forms upgrades if necessary.
To Next Page
Loading...
Need help?
General