Abelko IMSE WebMaster Pro - 9.2 Example

9
68
9 - Time control
9�2 Example
You can only edit or create a new calendar if you are logged in as
"cong". Go to Settings/Time control. A window appears contain-
ing all the calendars. If you have set up a controller with a pump
and night setback, there will already be at least two named cal-
endars. Uncongured calendars are called Calendar 3, 4, etc. The
process is more or less the same whether you are creating a new
calendar or editing an existing one.
The following section describes in detail how to create a calendar
to control when a gate is locked. You will then nd out how to edit
the existing calendars.
9�2�1 Gate lock
Gates are usually locked at the same time every day. We are going to create a calendar that locks the
gates at 19:00 every evening and opens them at 06:00 every morning. Click on the rst uncong-
ured calendar. All congured calendars have an asterisk * after the name.
Give this calendar the name Gate
lock. Select the type Time� Specify the
base period, in other words when the
calendar will be repeated. In the case,
the base period is every day. Check
the Active box and click Update. The
page is redrawn to reveal the settings.
Click on calendar item 1. The item
appears in an edit window. Enter the
start time 19:00:00 and the duration
11:00:00 (from 19:00 to 06:00). Check
the Active box and save by clicking
OK.