Abus HDCC90001 - Maintenance; General Information on Maintenance

Maintenance
59
Maintenance
General information on maintenance
Select the “Maintenance” item in the overview menu to
carry out system maintenance if problems arise.
In this menu you can check important status information
such as network capacity, you can import and export
configuration data and also reset the recorder to the
default settings.
Note
This menu is used for device maintenance and
should only be used by experienced users.
Menu
Setting
System Info
Device information (Serial No.,
Firmware Status etc.)
Log information
In Log Information (=log file),
you can search for recordings or
information (S.M.A.R.T. hard disk
drive status) by certain criteria,
such as alarm, exception,
operation or information.
Import/Export
Import and export settings
Update
Performs a firmware upgrade
Standard
Resets the system
Net Detect
Displays the transmission and
reception rate of the recorder
HDD Detect
Checks the hard disk drive for
errors