Abus HDCC90001 - Setting: Local; General Information on Local Settings; Live Cast Parameters

Setting: Local
21
Setting: Local
General information on local settings
You can configure the local settings for the browser plug-
in on your PC in this menu.
Note
The settings provided under "Local" are defined
separately for each PC user. If you access the
web interface from multiple PC systems, the
settings must be defined here for each PC user.
Live cast parameters
Parameter
Description
Protocol
Select the transfer protocol. TCP
offers the fastest transfer.
Stream type
Define the preset for live stream
configuration here. The preset is
always used as the default setting for
live image display.
Play
performance
Define the play performance. Auto is
the recommended setting.
Rules
Activates/deactivates the display of
visual VCA rules in the live image and
playback.
Image size
The setting can force a specific image
format for the live cast. Fixed formats
(4:3/16:9) may generate horizontal or
vertical edges in the image depending
on the signal source and on how the
live cast display is split (2x2, 3x3, etc.)
Auto live cast
Start
When existing live cast, the current
display (image panel distribution and
positioning of the cameras) is saved.
When live cast is opened again, the
saved display is restored.
Image format
Export format for snapshots