BZ001M056A ADT‐DK300A/400A Engraving Machine
91
041
WheelCoefficient
Range : 500~10000100~3000
Unit : mm/min
Authority : Operationadminorhigher
Default : 9000,1000
Effectivetime : Instant
Note :
Sethandwheelspeedandacceleration;
In handwheel mode, the maximum speed of handwheel movement
controlled by setting the maximum speed of the handwheel, wheel
coefficient is to control the acceleration of the wheel; if the machine
vibrates in handwheel mode, please adjust the two parameters to
smaller; however, the machine responsewillbeslowif it is too small;
pleaseadjusttothemaximumvalueaslongasthereisnovibration;
042 MCodeDelaytime
Range : 0~9999
Unit : ms
Authority : Operationadminorhigher
Default : 100
Effectivetime : Instant
Note : Setthewaitingtime(unit:ms)afterexecutingMcode
043
XHOMEOffset(pulse)
044
YHOMEOffset(pulse)
045
ZHOMEOffset(pulse)
046
4HOMEOffset(pulse)
Range :‐9999~9999
Unit : mm
Authority : Operationadminorhigher
Default : 0
Effectivetime : Instant
Note :
Setthecompensationhomeoffsetafteraxishomeoperation.
First, complete the mechanical home operation, offset corresponding
pulse,andthensetthispointasmechanicalhome.
Note:Thispar ameteris
invalidduringprogramhomeoperation.
047 Linenumber
To Next Page
Loading...
