Adtech ADT-DK300A - Page 121

BZ001M056A ADT‐DK300A/400A Engraving Machine

112
Authority : SuperAdmin
Default : 1
Effectivetime : Instant
Note : Setaxischaracteristics.
0:Rotaryaxis
1:Linearaxis
ThesettingofthisparameterandP2.066~069axiswillaffectthesetting
ofP2.041~044.PleaserefertotheparameterdescriptionofP2.041~044
fordetails.

066 
XRollingDisplayUsage
067 
YRollingDisplayUsage
068 
ZRollingDisplayUsage
069 
4RollingDisplayUsage
Range : 0~1
Unit : None
Authority : SuperAdmin
Default : 0
Effectivetime : Instant
Note : Setthecoordinatedisplaymode oftheaxis.Thisparameterisvalidwhen
P2.062~P2.065issetto0
0:0~360°display
1:‐9999.999~9999.999°display
ThesettingofthisparameterandP2.062~065axis
willaffectthesetting
ofP2.041~044.PleaserefertotheparameterdescriptionofP2.041~044
fordetails.

070 
XRollingPathOptimize
… 
…
073 
4RollingPathOptimize
Range : 0~1
Unit : None
Authority : SuperAdmin
Default : 1
Effectivetime : Instant
Note :
ThisparameterisvalidwhenP2.062~P2.065andP2.066~P2.069areset
to 0; set whether looking for shortest path automatically; if it is rotary