BZ001M056A ADT‐DK300A/400A Engraving Machine
114
Effectivetime : Instant
Note : This parameter determines the Z phase search direction when servo Z
phaseenableparameterisenabledinP2.009~P2.016.
0:Positive
1:Negative
082
XExtHomeEanble
083
YExtHomeEanble
084
ZExtHomeEanble
085
4ExtHomeEanble
Range : 0~1
Unit : None
Authority : SuperAdmin
Default : 1
Effectivetime : Instant
Note : When mechanical home mode is selected, this par amet er determines
whether external deceleration switch should be searche d . If this
parameterissetto 0,andP2.009~P2.016(servoZphaseenable)isalso
set
to 0, the home mode sets current point as the home directly in
mechanicalmode.
0:No
1:Yes
086
XEncoderLogicDir< >●
087
YEncoderLogicDir< >●
088
ZEncoderLogicDir< >●
089
4EncoderLogicDir< >●
Range : 0~1
Unit : None
Authority : SuperAdmin
Default : 0
Effectivetime : Instant
Note : If the logic direction obtained by the encoder is reverse to the actual
motiondirectionoftheaxis,pleasesetthisparameter.
HandwheelencoderreusesAaxisencoder.
To Next Page
Loading...
