ADTRAN Total Access 1248 User Manual

Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice
5-76 61179641L4-5B
NOTE
The SNMP version should match the agent used for SNMP on the
network management side.
4 Version This option is used to configure the SNMP version for the
second SNMP trap host. Options include the following:
•SNMPv1
•SNMPv2
5 IP Address This option is used to configure the third SNMP trap
host IP address in decimal dot format (i.e.,
###.###.###.###).
6 Version This option is used to configure the SNMP version for the
third SNMP trap host. Options include the following:
•SNMPv1
•SNMPv2
7 Trap Port This option is used to configure the SNMP trap port. The
trap port is defaulted to port 162.
Table 5-47. SNMP Trap Hosts Menu Options (Continued)
Option Description Function

ADTRAN Total Access 1248 Specifications

General

Brand	ADTRAN
Model	Total Access 1248
Category	Network Router
Language	English