EasyManuals Logo

ADTRAN Total Access 600R System Manual

ADTRAN Total Access 600R
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #162 background imageLoading...
Page #162 background image
162 © 2002 ADTRAN, Inc. 61200600L1-1A
Section 5 DLP-010 Total Access 600R System Manual
DLP-010
Loading Configuration using TFTP Server on Local Network
1. Connect to the unit using the 10/100BASET interface.
If you are not already connected to the unit’s 10/100BASET port using Telnet client software, use the
procedure in DLP-006, Telnetting to the Unit, to connect to the unit.
2. Log in to the unit using a FULL or SUPPORT level password (see DLP-003, Adding/Removing Telnet
Users and Changing Password Security Levels for details).
3. Verify the TFTP server is running on the network.
4. Go to the S
YSTEM UTILITY menu and select the CONFIGURATION TRANSFER menu; press <Enter>.
5. Verify the T
RANSFER METHOD is set to TFTP.
6. Set the TFTP S
ERVER IP ADDRESS to the IP address of the machine running the TFTP Server
Program.
7. Change TFTP S
ERVER FILENAME to a unique filename including path. This will be the name of the
configuration file retrieved from the remote server. An example filename would be ta_iad.cfg.
Some TFTP servers constrain the format of the filename depending on the operating system of the
server. For example, a TFTP server running on a PC under Windows 3.1 may only permit 8.3 format
filenames (8 characters, period and three extension characters).
8. Select the LOAD AND USE CONFIG menu field and press <Enter>.
Enter Y to confirm the request.
9. View CURRENT TRANSFER STATUS to verify the progress of the current upload.
10. When the upload has successfully completed, I
DLE displays in the CURRENT TRANSFER STATUS field.
Perform Steps Below in the Order Listed
A TFTP server ships as part of the ADTRAN utilities. If using ADTRAN utilities, choose
S
TART>PROGRAMS>ADTRAN UTILITIES>TFTP SERVER to start the server.
If you are using the ADTRAN TFTP server, the IP address displays in the STATUS field.
For other TFTP servers, please refer to the appropriate documentation.
The unit is rebooted immediately after a configuration is successfully loaded. Any online
sessions will be terminated.

Table of Contents

Other manuals for ADTRAN Total Access 600R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ADTRAN Total Access 600R and is the answer not in the manual?

ADTRAN Total Access 600R Specifications

General IconGeneral
BrandADTRAN
ModelTotal Access 600R
CategoryNetwork Router
LanguageEnglish

Related product manuals