MANAGING SWITCH
88
Attack, TCP Min Header Length, TCP Syn (SPORT < 1024), Null Scan Attack, X-Mas Scan
Attack, TCP SYN-FIN Attack, TCP SYN-RST Attack and TCP Fragment (Offset = 1).
DoS Port Settings
The DoS Port Settings page allow you to configure DoS security (enabled or disabled) for
the selected port.
To access this page, click Security > DoS Prevention > DoS Port Settings.
Figure 4-60. Security > DoS Prevention > DoS Port Settings
The following table describes the items in the previous figure.
The ensuing table for DoS Port Status settings are informational only: Port and DoS
Protection.
Table 4-58. Security > DoS Prevention > DoS Port Settings
Item Description
Port Select the port to configure for the DoS prevention function.
DoS Protection Click Enabled or Disabled to set the DoS Port security function state.
Apply Click Apply to save the values and update the screen.
To Next Page
Loading...