MANAGING SWITCH
138
4.10.5 DDM
The DDM page allows you to setup the diagnostic alarm status.
To access this page, click Diagnostics > DDM.
Figure 4-110. Diagnostics > DDM
The following table describes the items in the previous figure.
The ensuing table for Diagnostic Alarm Information settings are informational only:
Diagnostic Alarm.
Table 4-108. Diagnostics > DDM
Item Description
Diagnostic Alarm Click the drop-down menu to designate the announcement method:
Disabled, SysLog, E-mail, or SNMP.
Apply Click Apply to save the values and update the screen.
To Next Page
Loading...