Advantech EKI-7428G Series User Manual

MANAGING SWITCH
132
4.10.2 Ping Test
The Ping Test page allows you to configure the test log page.
To access this page, click Diagnostics > Ping Test.
Figure 4-105. Diagnostics > Ping Test
The following table describes the items in the previous figure.
Table 4-103. Diagnostics > Ping Test
Item Description
IP Address Enter the IP address or host name of the station to ping. The initial value is
blank. The IP Address or host name you enter is not retained across a
power cycle. Host names are composed of series of labels concatenated
with periods. Each label must be between 1 and 63 characters long,
maximum of 64 characters.
Count Enter the number of echo requests to send. The default value is 4. The
value ranges from 1 to 5. The count entered is not retained across a power
cycle.
Interval (in sec) Enter the interval between ping packets in seconds. The default value is 1.
The value ranges from 1 to 5. The interval entered is not retained across a
power cycle.

Advantech EKI-7428G Series Specifications

General

Brand	Advantech
Model	EKI-7428G Series
Category	Switch
Language	English