MANAGING SWITCH
114
SNMP User Settings
The SNMP User Settings page allows you to create SNMP groups. The users have the
same level of security and access control permissions as defined by the group settings.
To access this page, click Management > SNMP > SNMP User Settings.
Figure 4-87. Management > SNMP > SNMP User Settings
The following table describes the items in the previous figure.
Table 4-85. Management > SNMP > SNMP User Settings
Item Description
User Name Enter a user name (up to 32 characters) to create an SNMP profile.
Access Right Click read-only or read-write to define the access right for the profile.
Encrypted Click the option to set the encrypted option for the user setting.
Auth-Protocol Click the drop-down menu to select the authentication level: MD5 or SHA.
The field requires a user password.
MD5: specify HMAC-MD5-96 authentication level
SHA: specify HMAC-SHA authentication protocol
Password Enter the characters to define the password associated with the
authentication protocol.
Priv-Protocol Click the drop-down menu to select an authorization protocol: none or
DES.The field requires a user password.
None: no authorization protocol in use
DES: specify 56-bit encryption in use
To Next Page
Loading...
Need help?
General
