MANAGING SWITCH
95
4.7.7 IP Security
This section provides you a means to configure the IP Security settings.
Global Settings
The Global Settings page allows you to set the IP Security status (enabled or disabled).
To access this page, click Security > IP Security > Global Settings.
Figure 4-67. Security > IP Security > Global Settings
The following table describes the items in the previous figure.
The ensuing table for IP Security Status settings are informational only: IP Security.
Table 4-65. Security > IP Security > Global Settings
Item Description
Status Click Enabled or Disabled to define the global setting for the IP security
function.
Apply Click Apply to save the values and update the screen.
To Next Page
Loading...