MANAGING SWITCH
38
The ensuing table for DHCP Client Option 82 Information table settings are informational
only: Status, Circuit ID Format, Circuit ID String, Circuit ID Hex, Circuit ID User-Define,
Remote ID Format, Remote ID String, Remote ID Hex and Remote ID User-Define.
4.4.3 DHCP Auto Provision
The DHCP Auto Provision feature allows you to load configurations using a server with
DHCP options. Through the remote connection, the switch obtains information from a
configuration file available through the TFTP server.
To access this page, click System > DHCP Auto Provision.
Figure 4-11. System > DHCP Auto Provision
The following table describes the items in the previous figure.
The ensuing table for DHCP Auto Provision Information settings are informational only:
Status.
Remote ID Hex Enter the remote hex string of the corresponding class.
Remote ID User-
Define
Enter the remote user definition of the corresponding class.
Apply Click Apply to save the values and update the screen.
Table 4-9. System > DHCP Auto Provision
Item Description
Status Select the radio button to enable or disable the DHCP Auto Provisioning
Setting.
Apply Click Apply to save the values and update the screen.
Table 4-8. System > DHCP Client Option 82 (Continued)
Item Description
To Next Page
Loading...
Need help?
General
