Advantech EKI-7428G Series User Manual

MANAGING SWITCH
139
Figure 4-111. Diagnostics > DDM
The following table describes the items in the previous figure.
The ensuing table for Vendor Info settings are informational only: Refresh (click to reload
the vendor information), Port, Connector, Speed, VendorName, VendorOui, VendorPn,
VendorRev, VendorSn and DateCode.
Table 4-109. Diagnostics > DDM
Item Description
High Alarm Click Enabled or Disabled to set the alarm state.
High Warning Click Enabled or Disabled to set the alarm state.
Low Alarm Click Enabled or Disabled to set the alarm state.
Low Warning Click Enabled or Disabled to set the alarm state.
Apply Click Apply to save the values and update the screen.

Advantech EKI-7428G Series Specifications

General

Brand	Advantech
Model	EKI-7428G Series
Category	Switch
Language	English