MANAGING SWITCH
104
The following table describes the items in the previous figure.
The ensuing table for QoS Information settings are informational only: Trust Mode.
Port Settings
The Port Settings page allows you to define a trust state (enabled or disabled) to a listed
port.
To access this page, click QoS > QoS Basic Mode > Port Settings.
Figure 4-76. QoS > QoS Basic Mode > Port Settings
The following table describes the items in the previous figure.
The ensuing table for QoS Port Status settings are informational only: Port and Trust State.
Table 4-73. QoS > QoS Basic Mode > Global Settings
Item Description
Trust Mode Click the drop-down menu to select the trust state of the QoS basic mode.
Apply Click Apply to save the values and update the screen.
Table 4-74. QoS > QoS Basic Mode > Port Settings
Item Description
Port Enter the port number for the QoS basic mode setting.
Trust State Select Enabled or Disabled to set the port’s trust state status.
Apply Click Apply to save the values and update the screen.
To Next Page
Loading...