Advantech EKI-7428G Series User Manual

MANAGING SWITCH
70
MST Config Identification
The MST Config Identification page allows you to configure the identification setting name
and the identification range.
To access this page, click L2 Switching > Spanning Tree > MST Config Identification.
Figure 4-42. L2 Switching > Spanning Tree > MST Config Identification
The following table describes the items in the previous figure.
The ensuing table for MST Configuration Identification Information settings are
informational only: Configuration Name and Revision Level.
Table 4-40. L2 Switching > Spanning Tree > MST Config Identification
Item Description
Configuration Name Enter the identifier used to identify the configuration currently being used. It
may be up to 32 characters.
Revision Level Enter the identifier for the Revision Configuration, range: 0 to 65535
(default: 0).
Apply Click Apply to save the values and update the screen.

Advantech EKI-7428G Series Specifications

General

Brand	Advantech
Model	EKI-7428G Series
Category	Switch
Language	English