R3131 Spectrum Analyzer Operation Manual
3.4 Setting Values
3-60* Aug 28/98
3.4.4 Defaults Configuration Values
These are the default settings used when the Defaults Config softkey is pressed.
Table 3-5 Values for Default Config
Parameter Default Setting
Copy destination setting Printer
Printer type PCL
Screen output mode GRAY SCALE MODE
GPIB address 8
Baud rate 9600bps
Data length 8
Stop bit length 1
Parity bit type None
XON/XOFF signal output ON
Bit map file number 1
Date display ON
Date display mode Month/day/time
To Next Page
Loading...
