R3131 Spectrum Analyzer Operation Manual
2.4 Other Functions
2-99Aug 28/98
2.4.4 Setting Date and Time
This section explains how to set the date and time for the spectrum analyzer. In the following example, a
time and date of 1:35 pm Dec 10 1997 is set.
Setting the date and time
1. Press CONFIG and Time/Date.
The Time/Date menu appears.
Figure 2-95 Time/Date Menu
2. Press Year, 1, 9, 9, 7 and Hz(ENTER).
The year is set to 1997.
3. Press Month 1, 2 and Hz(ENTER).
The month is set to December.
4. Press Day, 1, 0 and Hz(ENTER).
The date is set to the 10th.
To Next Page
Loading...
Need help?
General
