R3131 Spectrum Analyzer Operation Manual
2.2 Basic Operation
2-34 Apr 10/98
Signal tracking
This function performs a peak search using a signal with the marker in each sweep,
and the detected frequency is set to the center frequency. The detected peak frequency
is always set as the center frequency.
6. Press MKR and Sig Track ON/OFF.
Signal tracking is turned on. The detected peak frequency is always set as the
center frequency even if the input signal frequency varies.
Figure 2-26 Signal Tracking Screen
7. Press Sig Track ON/OFF.
Signal tracking is turned off.
To Next Page
Loading...
Need help?
General
