R3131 Spectrum Analyzer Operation Manual
2.2 Basic Operation
2-35Apr 10/98
Continuous peak search
This function detects a peak for each sweep, and always moves the marker to that
peak. The marker is always displayed on the peak.
8. Press Peak Menu and Cont Peak ON/OFF.
The Cont peak search is turned on. A peak is detected in each sweep and the
marker is always moved to that peak even if the input signal frequency varies.
Figure 2-27 Continuous Peak Search Screen
9. Press Cont Peak ON/OFF.
Continuous peak search is turned off.
To Next Page
Loading...
Need help?
General
