Aeroflex 3412 - Page 236

REMOTE OPERATION OUTPUT COMMANDS
4-22
OUTPut:MODulation:FM[1]|2[:STATe]
Description: Turns the source feeding the FM1 or FM2 modulator on or off; other active modulators
are not affected. See Fig. 4-1 on page 4-19.
Corresponds to the SOURCE ON/OFF key.
Parameters: <Boolean>
Valid values: OFF | ON | 0 | 1
*RST sets: ON
OUTPut:MODulation:FM[1]|2[:STATe]?
Description: Queries the state of the frequency modulation source.
Parameters: None
Response: <Boolean>
Returned values: 0 | 1
OUTPut:MODulation:IQ[:STATe]
Description: Turns the source feeding the IQ modulator on or off; other active modulators are not
affected. See Fig. 4-1 on page 4-19.
Corresponds to the SOURCE ON/OFF key.
Parameters: <Boolean>
Valid values: OFF | ON | 0 | 1
*RST sets: ON
OUTPut:MODulation:IQ[:STATe]?
Description: Queries the state of the IQ modulation source.
Parameters: None
Response: <Boolean>
Returned values: 0 | 1